SD963

XIGMATEK LOKI SD963 92mm HYPRO Bearing CPU Cooling

rate 4.7
  • Brand: Xigmatek
  • Category: Computer Cooling Fans

Buy at Amazon
Outstanding performance and quiet, LOKI SD963 outmatches other air coolers. Equipped with 3pcs F6 mm heat-pipe design and light material fins, it provides outstanding heat dissipating efficiency and cooling performance. With anti-vibration rubber, it is much more quiet and reliable. It is easy to install with universal retention module for Intel and AMD CPUs. Superior Heat Transfer Three U-type heatpipes integrated with H.D.T. (Heatpipe Direct Touch) technology and high-density aluminum fins create most efficient heat conduction and outstanding cooling performance. 92mm PWM Fan with Anti-vibration Rubbers The PWM fan automatically adjusts its speeds according to the CPU temperature for efficient cooling and minimized fan noise. A second fan can be installed for more cooling performance and the included anti-vibration rubbers further reduce noise. Universal Socket Compatibility The XIGMATEK LOKI SD963 features a universal retention module design for broad compatibility with AMD K8/AM2/AM2+/AM3 platforms, as well as the Intel LGA 775/1156/1366 platforms.

 

  • H.D.T. (Heat-pipe direct touch) technology
  • Anti-vibration rubber design.
  • 5 in 1 application: LGA775 /1156 / 1366 ; Socket K8 / AM2 / AM3
  • Dual fan capable
Manufacturer :
XIGMATEK
Model :
LOKI SD963
UPC :
883371002206

Manuals

Kramer 5.0
1 of 1 people found the following review helpful
I needed to replace my stock heat sink on my i5 and this product gained my attention because it was cheap(er) and had good reviews. The product was easy to install, but time consuming since you have to install the back plate to hold it. The heat sink is extremely easy to seat. Lowered my cpu temps from ~45c(using arctic silver and stock heatsink) to ~38c at idle(using arctic silver). I would definitely recommend this to anyone looking for a cheap alternative to a stock heatsink.
stepCHIILD "Ryan" 5.0
1 of 1 people found the following review helpful
This cooler has done me well for several years. It will soon treat someone else just as well.Pros: Feels VERY solid when attached, very quiet (some dislike the rubber fan mounts, I LOVE them, no vibration!) comes with an extra set of the rubber mounts for when you add your second fan. Cools my X4 955 Black Edition Overclocked keeping me well under 60c with stock voltage. Cheap for what you're getting, easily a Zalman competitor! Not heavy enough that I'd be worried about warping a motherboard.B ... EASTLY ;)I will be selling this cooler and the additional fan from its push pull set-up for 20 dollars (after 3 years of use!) for a closed loop liquid cooler from Antec.Cons: The fins are very flexible and tend to get bent a little during fan install. Its large size could be seen as a con for some motherboards (interfering with ram heat sinks). More >
zank 5.0
1 of 1 people found the following review helpful
I used it to replace stock heat sink and help cool on board graphics/ north bridge. dropped temps by 10-15c. not difficult to install.